CLLCW - REMOVER, PAINT,ALKALI F/HOT APPLICATION CL

  • MSDS: CLLCW
  • Manufacturer: ELDORADO CHEMICAL COMPANY INC
  • Product Name: REMOVER, PAINT,ALKALI F/HOT APPLICATION CL
  • National Stock Number: 8010-01-380-2330
Product Identification

Product ID:REMOVER, PAINT,ALKALI F/HOT APPLICATION CL
MSDS Date:05/30/1997
FSC:8010
NIIN:01-380-2330
Status Code:A
MSDS Number: CLLCW

Responsible Party
ELDORADO CHEMICAL COMPANY, INC.
14350 LOOKOUT ROAD
SAN ANTONIO, TX 78265-4837
US

Emergency Phone: 1-800-255-3924

Info Phone: 210-653-2060/FX2106530825

Preparer: ERHEST CARTER

Cage: 55208

Contractor
ELDORADO CHEMICAL COMPANY, INC.
34837 SAN ANTONIO, TX 78265-4837 US

Telephone: 800-531-1088/ 210-653-2060

Cage: 55208

Ingredients

DICHLOROMETHANE

CAS: 75-09-2

RTECS: PA8050000

OSHA PEL see Table Z-2

ACGIH TLV: 174 MG/M3;50 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


PHENOL

CAS: 108-95-2

RTECS: SJ3325000

OSHA PEL 19 MG/M3;5 PPM

ACGIH TLV: 19 MG/M3;5 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


SODIUM CHROMATE

CAS: 07775-11-3

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:INHALATION ACUTE: HIGH;ABSORBED IN
LUNGS CHRONIC: SLIGHT. SKIN CONTACT ACUTE: CORROSIVE. SKIN
ABSORPTION. CHRONIC: SLIGHT EYE CONTACT ACUTE: HIGH; CORROSIVE TO
EYES, CHRONIC: SLIGHT.
Effects of Overexposure:INDUCES NARCOSIS, DIZZINESS, NASEA. CORROSIVE
TO SKIN. CONTACT IS PAINFUL; SKIN ABSORPTION WOULD BE UNLIKELY.
CORROSIVE TO EYES ON CONTACT; SHORT EXPOSURE. WILL CAUSE HAZY
VISION WHICH RETURNS TO NORM AL.

First Aid

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES; CONSULT
PHYSICIAN.SKIN: WASH WITH SOAP AND WATER. INHALATION: REMOVE TO
FRESH AIR; IF UNCONSCIOUS, FIVE OXYGEN & SEEK MEDICAL
ATTENTION.INGESTION: CONTACT PHYSIC IAN IMMEDIATELY.

Fire Fighting

Autoignition Temp:=648.9C, 1200.F
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:NONE
Fire Fighting Procedures:SCBA REQUIRED.
Unusual Fire/Explosion Hazard:TOXIC CHLORIDE FUMES MAY BE GENERATED BY
CONTACT WITH FLAME.

Accidental Release

Spill Release Procedures:CONTAIN AND CLEAN UP WITH ABSORBENT

Handling

Other Precautions:ALL MATERIALS USED IN THE MANUFACTURING HAVE BEEN
CERTFIED BY THEIR MANUFACTURER AS BEING ON THE CURRENT TSCA
INVENTORY.

Exposure Controls

Respiratory Protection:SCBA REQUIRED IF LIMITS EXCEEDED
Ventilation:100 FT/MIN
Protective Gloves:POLYETHYLENE
Eye Protection:FACE SHIELD AND GOGGLES
Other Protective Equipment:RUBBER APRON AND BOOTS
Work Hygienic Practices:DO NOT USE IN CONFINED SPACES. AVOID ALL SKIN
CONTACT.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:=48.9C, 120.F
B.P. Text:760 M M HG
Vapor Pres:380 M MM HG
Vapor Density:(AIR=1) 2.
Spec Gravity:1.1
pH:9.2
Evaporation Rate & Reference:WATER 1>1
Solubility in Water:PARTIALLY SOLUBLE
Appearance and Odor:THICK, YELLOW LIQUID PHENOL ODOR.
Percent Volatiles by Volume:70%

Stability

STRONG ALKALIS, STRONG OXIDIZERS, AND REACTIVE METALS.
Hazardous Decomposition Products:HEAT WILL PRODUCE DICHLOROMETHANE AND
AMMONIA FUMES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.